Tripp Lite line conditioner 230v User Manual

Page of 6
Safety
Line Conditioner Location Warnings
•  Install your Line Conditioner indoors, away from excess moisture or 
heat, dust or direct sunlight.
For best performance, keep the indoor temperature between 0° C and 
40° C (between 32° F and 104° F).
•  Leave adequate space around all sides of the Line Conditioner for 
proper ventilation.
Line Conditioner Connection Warnings
Connect your Line Conditioner to a three-wire, grounded AC power outlet. Do
not remove or modify the ground pin of the Line Conditioner's plug.
•  Do not use two-prong adapters with the Line Conditioner's plug. Do not plug 
your Line Conditioner into itself; this will damage the Line Conditioner and 
void your warranty.
•  If you are connecting your Line Conditioner to a motor-powered AC 
generator, the generator must provide clean, filtered computer-grade output.
•  Use care when connecting country-specific plugs to selected 220/240V, 
50/60 Hz Line Conditioners. Hot 1 and Hot 2 may be reversed. When using a
French CEE7/7 plug, always use the separate grounding pin supplied with 
the unit. When using a Schuko CEE7/4 plug, an ungrounded condition will 
exist unless separate grounding to the rear of the Line Conditioner is 
provided by the user.
Equipment Connection Warning
•  Do not use Line Conditioners for life support applications in which 
a malfunction or failure of a Line Conditioner could cause failure or 
significantly alter the performance of a life-support device.
Line Conditioner Maintenance Warning
Line Conditioners require no maintenance. Keep the Line 
Conditioner dry at all times. DO NOT open the unit for any reason.
This manual contains important instructions and warnings that should
be followed during the installation, operation and storage of all Line
Conditioners.
2
Line Conditioner Manual.qxd  7/2/2004  12:37 PM  Page 2