TP-LINK TL-SL2109 User Manual
TL-SL2109
8+1G Gigabit Ethernet Smart Switch User Guide
Chapter 3: Installation
3.1 Installation
Firstly, please place the switch following the steps:
The surface must support at least 5kg;
The power source must be within 1.5m;
Check the power cable carefully to make sure the connection to AC power;
Leave enough space for the ventilation.
3.1.1 Installation on the desktop
1. Place the Switch on a desk which has enough space;
2. Take off the four pads’ adhesive tape and adhere to the four circle grooves on the
2. Take off the four pads’ adhesive tape and adhere to the four circle grooves on the
bottom of the switch respectively;
3. Turn off the switch again, place on the desktop.
3.1.2 Rack Installation
The TL-SL2109 can be mounting in an EIA Standard size 19 inches rack.
1. Attach the mounting brackets to each side of the TL-SL2109 with the screwes;
2. Slide the TL-SL2109 into the rack;
3.
1. Attach the mounting brackets to each side of the TL-SL2109 with the screwes;
2. Slide the TL-SL2109 into the rack;
3.
Use the screwes to secure the switch to the rack..
Figure 3-1 Rivet the “L” brackets onto the Switch
- 5 -