TP-LINK TD-8817 User Manual

 

5 

configuration. You may need to check this part of information with your ISP and make sure 
everything have been input correctly. Refer to 

 and 

 for more 

information. 

 

Figure 2-2 



  ON/OFF: The switch for the power. 



  POWER: The Power plug is where you will connect the power adapter. 



  USB: Connect with your computer’s USB interface. 



  LAN: Through the port, you can connect the modem router to your PC or the other Ethernet 

network devices. 



  RESET: There are two ways to reset the modem router's factory defaults.   

Method one: With the modem router powered on, use a pin to press and hold the Reset 

button (about 5 seconds) until all LEDs are lit. And then release the button and wait for the 

modem router to reboot to its factory default settings.   

Method two：Restore the default setting from “Maintenance-SysRestart” of the Router's 

Web-based Utility. 



  ADSL: Through the port, you can connect the modem router with the telephone. 



  The Product should not be located where it will be exposed to moisture or excessive heat. 



  Place the modem router in a location where it can be connected to the various devices as 

well as to a power source. 



  Make sure the cables and power cord are placed safely out of the way so they do not create a 

tripping hazard. 



  The modem router can be placed on a shelf or desktop. 

 
Generally, TD-8817 is placed on a horizontal surface. The device also can be mounted on the wall 
as shown in Figure 2-3.