TP-LINK TL-WR700N User Manual

 

- 92 - 

1. Click 

the 

Add New button.  

2.  Enter the following data: 

¾

 

Destination IP Address - The Destination IP Address is the address of the network or host 
that you want to assign to a static route. 

¾

 

Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network 
portion, and which portion is the host portion. 

¾

 

Gateway - This is the IP Address of the gateway device that allows for contact between the 
router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status pull-down list. 

4. Click 

the 

Save button to save it. 

 

Figure 5-45 Add or Modify a Static Route Entry 

To modify or delete an existing entry: 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled. 

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries 

You can configure the IP QoS function on this page.