Alliance Laundry Systems D677I User Manual

Maintenance

510969

Before You Call for Service

You may save time and money by checking the
following:

If the Dryer:

Does

Not

Start

Does

Not

Heat

Does Not Dry

Clothes

Satisfactorily

Possible Reason – Do This to Correct

•

Metered Models – Insert coin(s) or card.

•

Nonmetered models – Turn the timer knob further into the cycle.

•

Be sure the cord is plugged all the way into the electrical outlet.

•

Close the loading door.

•

Make sure the controls are in a HEAT setting.

•

Metered Models – Activate time accumulator.
Push the coin slide all the way in.

•

Press the PUSH-TO-START pad.

•

Has the laundry room fuse blown or become loosened, or is a circuit breaker
OFF? The dryer itself does NOT have an electrical fuse.

•

Has the motor overload protector cycled? Wait 10 minutes and try again.

•

Gas Dryers Only – Check to see if the gas valve in the dryer (behind the lower
front panel) and the main gas line valve are turned on.

•

Clean the lint filter.

•

Check the exhaust duct to the outside to see if it is kinked, blocked or needs
cleaning.

•

Check the weather hood to make sure the flappers move freely, are not pushed
in or have not been blocked.

•

Is the load too small? Small loads may not tumble properly or dry evenly.