Alliance Laundry Systems T453I User Manual
27
M414462
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
Daily
Keep tumbler area clear and free from combustible
materials, gasoline, and other flammable vapors and
liquids.
materials, gasoline, and other flammable vapors and
liquids.
Lint Removal
1. Open the lint panel or pull out lint drawer.
2. Remove all accumulated lint in the lint
compartment area. Lightly brush any lint that
may be left on the lint screen. Lint left in the lint
compartment is drawn back onto the lint screen
and will restrict proper air circulation.
may be left on the lint screen. Lint left in the lint
compartment is drawn back onto the lint screen
and will restrict proper air circulation.
3. Be sure the lint screen is not torn. If it is, replace
immediately. A torn lint screen allows lint to pass
from the tumbler to the ductwork system, thus
creating a restriction to air circulation.
from the tumbler to the ductwork system, thus
creating a restriction to air circulation.
4. The lint screen is designed to completely cover
the entire opening in the lint screen panel. Be
sure that it does so. Excessive gaps between the
lint screen and the lint screen panel allows lint to
pass into the ductwork system.
sure that it does so. Excessive gaps between the
lint screen and the lint screen panel allows lint to
pass into the ductwork system.
5. 50-170 Pound Tumblers: Wipe any accumulated
lint off of the thermostat sensing probe, cabinet
hi-limit thermostat or thermistor. Failure to do so
will allow a buildup of lint in this area to act as an
insulator, causing the tumbler to overheat.
hi-limit thermostat or thermistor. Failure to do so
will allow a buildup of lint in this area to act as an
insulator, causing the tumbler to overheat.
6. Replace the lint compartment access panel on the
tumbler, ensuring a tight fit and lock.
Figure 15
Figure 16
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
To reduce the risk of serious injury, do not
open the lint panel while the tumbler is in
operation. Open tumbler door and allow
cylinder to completely stop before cleaning
lint screen.
open the lint panel while the tumbler is in
operation. Open tumbler door and allow
cylinder to completely stop before cleaning
lint screen.
W079
WARNING
T388I
1
Lint Screen
TMB98N
T388I
0220S, 0270S, & 0350S MODELS
1
0300D MODELS