Digidesign 2 User Manual
Getting Started with Digi 002
100
OMS searches for and displays any detected
OMS drivers and interfaces. If your interface is
not detected, click Troubleshoot. Once your in-
terface is detected, you are prompted to search
for MIDI instruments connected to your inter-
face.
OMS drivers and interfaces. If your interface is
not detected, click Troubleshoot. Once your in-
terface is detected, you are prompted to search
for MIDI instruments connected to your inter-
face.
3
Click OK to search for MIDI devices connected
to your MIDI interface. To be detected, the de-
vice must be turned on with both of its MIDI
ports connected to your MIDI interface.
vice must be turned on with both of its MIDI
ports connected to your MIDI interface.
OMS searches for and displays any detected
MIDI devices. Some older instruments, as well as
some newer ones, may not be recognized by the
OMS auto-detection routines.
MIDI devices. Some older instruments, as well as
some newer ones, may not be recognized by the
OMS auto-detection routines.
Digi 002 has two MIDI Out ports, which show
up as two separate MIDI interfaces in the Studio
Setup window.
up as two separate MIDI interfaces in the Studio
Setup window.
Devices not recognized by OMS appear with a
red question mark and are named based on the
interface or port to which they are connected.
These devices can be defined as necessary within
the OMS Setup application (see “Defining MIDI
Devices in OMS” on page 101).
red question mark and are named based on the
interface or port to which they are connected.
These devices can be defined as necessary within
the OMS Setup application (see “Defining MIDI
Devices in OMS” on page 101).
4
Click OK to save your Studio Setup document.
OMS Driver Setup
Undefined OMS device
OMS Studio Setup