American Dynamics RAS917 User Manual
SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY
8200-0184-09, REV. A
OPERATOR’S MANUAL SUPPLEMENT
7 of 13
VM16/ADTT16 (White Touch
Tracker)
Tracker)
Supported Protocol
SensorNet
RS-422 (1)
Maximum Presets
96 – SensorNet
4 – RS-422
Maximum Patterns (2)
3
Quick Set Menu
Not supported
Address Range
1-16
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
VM16E/ADTT16E (Black Touch
Tracker)
Tracker)
Supported Protocol
SensorNet
RS-422 (1)
Maximum Presets
96 – SensorNet
4 – RS-422
Maximum Patterns (2)
3
Quick Set Menu
Yes (3)
Address Range
1-16 or
1-64 (3)
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM)
or newer.
or newer.
VM32/AD32
Supported Protocol
SensorNet
RS-422 (1)
Maximum Presets
96 – SensorNet
4 – RS-422
Maximum Patterns (2)
3
Quick Set Menu
Not supported
Address Range
1-32
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
VM96 (1)
Supported Protocol
SensorNet
RS-422
Maximum Presets
Unlimited (2)
Maximum Patterns (3)
3
Quick Set Menu
Not supported
Address Range
1-32
Notes:
(1) Requires software version 5.2 or newer.
(2) Preset information is stored at the host, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.
pattern cannot exceed 6 minutes 50 seconds.
Total dome commands used in all patterns
cannot exceed 99.