honda-automobiles 2009 accord sedan User Manual

Page of 420
If equipped
Passenger’s side
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment should
be done by your dealer or other
qualified technician.
Remove the three fasteners with a
flat-tip screwdriver.
Pull down the under cover from
the bumper carefully.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
1.
2.
3.
Replacing a Fog Light Bulb
Lights
336
ELECTRICAL
CONNECTOR
TAB
FASTENERS
Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.
08/06/05 16:57:10 31TA0610 0341 
 2009  Accord  Sedan 
Table Of Contents
Main Menu