Alliance Laundry Systems LGS19A User Manual
504607
5
Installing the Dryer . . .
Step 1:
Position and Level
the Dryer
the Dryer
For further assistance refer to Section on Location
Requirements.
Requirements.
Install dryer before washer. This allows room for
attaching exhaust duct.
attaching exhaust duct.
Place the dryer in position, and adjust the legs until the
dryer is level.
dryer is level.
Step 2:
Connect Dryer Exhaust System
For further assistance refer to Sections on Location
Requirements and Dryer Exhaust Requirements.
Requirements and Dryer Exhaust Requirements.
• DO NOT use plastic or thin foil flexible ducting.
• Locate dryer so exhaust duct is as short as possible.
• Be certain old ducts are cleaned before installing
your new dryer.
• Use 4" (10.2 cm) diameter rigid or flexible metal
duct.
• Use as few elbows as possible.
• Use duct tape on all joints.
• Failure to exhaust dryer properly will void
NOTE: Venting materials are not supplied with the
dryer (obtain locally).
dryer (obtain locally).
D298IE1A
DRYER
BASE
LEVELING
LEG
LEVEL
D259I
A clothes dryer produces combustible lint.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
To reduce the risk of fire and combustion
gas accumulation the dryer MUST be
exhausted to the outdoors.
W116
WARNING
DO
D314IE0C
DON'T
D315IE0C