Alliance Laundry Systems LES33A User Manual

Page of 52
504607
21
User-Maintenance Instructions . . .
Lubrication
All moving parts are sealed in a permanent supply of 
lubricant or are equipped with oilless bearings. 
Additional lubrication will not be necessary.
Care of Your Dryer
Clean the lint filter after drying each load. The lint filter 
may be washed if needed. Occasionally remove lint 
filter and vacuum the area under it.
Ordinarily, the dryer cylinder will need no care.
Wipe the dryer cabinet as needed. If detergent, bleach 
or other washing products have been spilled on the 
dryer, wipe immediately. Some products will cause 
permanent damage if spilled on the cabinet.
Do not allow sharp or rough objects to lean against the 
dryer. The finish could be damaged.
Use only a damp or sudsy cloth for cleaning the control 
panel. Some spray prewash products may harm the 
finish on the control panel.
NOTE:  The wiring diagram is located inside the 
control panel.
Exhaust System
The exhaust duct should be inspected after one year of 
use and cleaned if necessary. Inspect and clean exhaust 
duct every one to two years as required thereafter.
The weather hood should be checked frequently to 
make sure the dampers move freely, dampers are not 
pushed in and that nothing has been set against them.
Keep dryer area clear and free from combustible 
materials, gasoline and other flammable vapors and 
liquids.
Do not obstruct the flow of combustion and ventilation 
air.
NOTE:  Verify proper operation after servicing.
Label all wires prior to disconnection when 
servicing controls. Wiring errors can cause 
improper and dangerous operation.
W049
CAUTION