TP-LINK TL-WR720N User Manual

150Mbps Wireless N Router

7106503893

QIG

150Mbps Wireless N Router

Resource CD

Insert the TP-LINK Resource CD into the CD-ROM drive.

Select TL-WR720N and click Easy Setup Assistant. 

Ethernet Cable

TL-WR720N

If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration. 

Power Adapter

Computer

Cable/DSL Modem

Wall Socket

Wall Socket

Internet

Connect the  WAN port on your Router to the modem’s LAN  port with an Ethernet cable.
Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.

Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.

Power off your modem.

Power on the modem and wait for one minute .

Select the WAN connection type your ISP provides and click 

NEXT. Here we take Dynamic IP for example.

After confirming the hardware connection and the status 
of LEDs, please click NEXT to continue.

After the connectivity is checked successfully, please click 

NEXT.

You can rename your wireless network on this page. 
The default wireless name is TP-LINK_XXXXXX.  Click 

NEXT to continue.

You are recommended to select Most Security 

(WPA2-PSK) to secure your wireless network. 

The default wireless 
password, the same 
as the PIN code, is 
printed on the label 
at the bottom of the 
Router.  

The Router is 
pre-encrypted. 

Select your language from the drop-down menu. Click 

START and the Easy Setup Assistant will guide you step 

by step to set up the Router.