Tecumseh oh195sa-oh195sp (ohsk50-75) User Manual

181-1275-14

Page 5

If your engine has an oil fill cap/dipstick go to step 1. If your 
engine does NOT have an oil fill cap/dipstick, see "II. Oil Fill 
Cap/Plug" instructions below.

1.

Be sure engine is upright and level.

2.

Unscrew oil fill cap/dipstick from oil filler tube and wipe 
dipstick clean. See Figures 8 and 9.

3.

Screw oil fill cap/dipstick back into oil filler tube. Tighten 
securely.

4.

Unscrew and remove oil fill cap/dipstick from oil filler 
tube. Note oil level. If oil reading on dipstick is below 
“ADD” mark, slowly add oil to reach “FULL” level. See 
Figure 7 on page 4. Afterward, continue reading 
instructions below.

5.

Screw oil fill cap/dipstick back into oil filler tube. 
Tighten securely.

6.

Wipe away any spilled oil.

If your engine does NOT have an oil fill cap/dipstick, go to 
step 1. If your engine has an oil fill cap/dipstick, see "I. Oil 
Fill Cap/Dipstick" instructions above.

1.

Be sure engine is upright and level.

2.

Clean area around oil fill cap/plug. See Figure 9.

3.

Unscrew oil fill cap/plug. 

4.

Add oil to overflow point, making sure to avoid spilling.

5.

Screw oil fill cap/plug back into oil fill hole. 
Tighten securely. 

6.

Wipe away any spilled oil.