Epson 10+ User Manual

1. Press the 

Menu

 button. You see the menu screen.

2. Press the 

Select

 button to select the Image menu. Then press the 

Select

 button again to 

select 

Picture

 

Quality

.

3. Use the arrow buttons on the remote control or the 

, 

,   or 

 buttons on the 

projector to set the following options:

■ Brightness

Adjusts the brightness of the picture. Increase (+) the setting to make the picture 
brighter, or decrease (-) the setting to reduce brightness.

■ Contrast

Adjusts the contrast between colors or shades in the picture. 

■ Sharpness

Adjusts the sharpness of the picture.

■ Saturation 

(video only)

Adjusts the color depth of the picture.

■ Tint

 (component or NTSC video only)

Adjusts the tint or hue of colors in the picture.

■ Color Temperature

Adjusts red or blue tones. A lower color temperature produces a picture with more 
red, while a higher color temperature produces more blue and sharper color tones.

■ Flesh Tone

Adjusts the balance of green to magenta in the image.

■ Tracking

 (computer images only)

Removes unwanted vertical lines from a computer image by matching the projector’s 
internal clock to the computer display signal.

■ Sync

 (computer images only)

Corrects fuzziness by synchronizing the projector with the tracking signal sent from 
the computer.

4. Select the 

Color Mode

 option and choose from these settings:

■ Dynamic

For projecting in bright rooms; images will have greater color intensity.

■ Living Room

For projecting in rooms with a lot of ambient light; images retain their natural color.