Cadillac seville 2000 User Manual

1. The turn signal lamps are located on the outboard side  

of the headlamps. To access, remove the headlamp,
(see Steps 1, 2 and 3 under “Headlamps”).

2. Press the bulb socket tab and turn the bulb socket

counterclockwise to unlock the socket from the 
lamp housing.

3. To remove the bulb, grasp the socket firmly and 

pull the bulb out. Install the new bulb and reverse 
the steps to replace.

1. Open the trunk to gain access to the lamp housing.

2. Remove the rear

compartment sill plate
by removing the upper
convenience net
retainers, located at 
each end, as shown.

3. Move the spare tire cover out of the way.

4. Pull the trunk trim away to access the wing nuts.