Hanna Instruments hi 38054 User Manual

Instruction Manual

www.hannainst.com

Dear Customer,
Thank you for choosing a Hanna Product.
Please read the instruction sheet carefully before using the
test kit. It will provide you with the necessary information
for correct use of the kit. If you need additional information,

do not hesitate to e-mail us at tech@hannainst.com.
Remove the chemical test kit from the packing material and

examine it carefully to make sure that no damage has
occurred during shipping. If there is any noticeable dam-
age, notify your Dealer or the nearest Hanna office
immediately.
Each kit is supplied with:

• HI 93711-0 Total Chlorine Reagent, packets (100 pcs);
• Deionized Water, 1 bottle (500 mL);
• 1 checker disc (containing the 38054 disc);
• 2 glass vials with caps;
• 1 plastic pipette (3 mL).

Note: Any damaged or defective item must be returned in

its original packing materials.

HI 38054

Ozone

Test Kit

ISTR38054 09/00 PRINTED IN ITALY

Ozone is an oxidizing agent and a germicide. It is used for
oxidation of organic matter, which produces color or odor in
drinking water.
Note: mg/L is equivalent to ppm (parts per million).

SPECIFICATIONS

SIGNIFICANCE AND USE

CHEMICAL REACTION

INSTRUCTIONS

The reaction between ozone and the reagent causes a pink

tint in the sample which is proportional to the ozone
concentration.

Range

0 to 2.3 mg/L (ppm) as Ozone

Smallest Increment

0.1 mg/L

Analysis Method

Colorimetric

Sample Size

5 mL

Number of Tests

100

Case Dimensions

235x175x115 mm (9.2x6.9x4.5")

Shipping Weight

966 g (34.1 oz)

READ THE ENTIRE INSTRUCTIONS BEFORE USING THE KIT
• Use the pipette to fill each glass vial with

5 mL of sample (up to the mark).

• Insert one of them into the left hand opening of the

checker disc. This is the blank.

• Add to the other vial deionized water up to the 10 mL

mark. Replace the cap and shake to mix.

• Remove the cap and add 1 packet of HI 93711-0

reagent. Replace the cap and mix.

• Wait for 2 minutes to allow reaction to

occur. This is the reacted sample.

• Remove the cap and insert the

reacted sample into the right
hand opening of the checker

disc.

• Hold the checker disc so that a

light source illuminates the
samples from the back of the
windows.

• Keep the checker disc at a distance of 30-40 cm (12-

16") to match the color. Rotate the disc while looking at
the color test windows and stop when you find the color
match. Read the value in the result window directly in
mg/L (or ppm) of Ozone.

For best results: Perform the reading three times and

take the average value (divide by 3 the sum of the
three numbers). Intensely colored samples will make
the color matching difficult and they should be
adequately treated before performing the test. Sus-
pended matter in large amounts should be removed

by prior filtration.

Caution:

Ultraviolet radiation may cause fading of colors.

When not in use, keep the disc protected from light,
in a cool and dry place.

Interferences: chlorine, bromine, iodine and oxidized man-

ganese.

The chemicals contained in this kit may be hazardous if

improperly handled. Read the relevant Health and Safety
Data Sheet before performing this test.

HEALTH AND SAFETY

REFERENCES

Adaptation of the EPA recommended DPD method 330.5.

5 mL