Philips 2 Series User Manual

Note: The characters in brackets (a) correspond to the characters

in fig. 4 of ‘Controls and connections’. 

Always switch off the projector before making any connections.
Always turn down the volume control of the connected amplifier
before switching it on, to prevent damage to the speakers.

•

Connect the Audio in L/R sockets of an amplifier or stereo
system to the Audio out socket 

of the projector.

For this use audio/video connection cable 

supplied.

You can select fixed (‘Line’) or variable (‘Regulated’) volume
output in the ‘Audio’ menu.

The characters in brackets 

correspond to characters in

fig. 4 of ‘Controls and connections’.

Always switch off PC, external monitor and projector before
making any connections.

•

Connect the Data out terminal 

of the projector to the

external monitor and secure the plugs by tightening the
thumb screws.
For this, use the monitor cable supplied with the monitor.

To obtain the audio signal on the monitor instead of on the
projector:
•

Connect the Audio in sockets of the monitor to the Audio out
socket 

of the projector, using the audio/video connection

cable 

supplied.

–

One external monitor or projector can be connected at a time.

– For further details on the operation with On Screen Displays

see chapter ‘8. Operation’.

14