Philips 26PFL7532D User Manual

English

33       Troubleshooting

Below is a list of  symptoms you may encounter with your TV. Before you call for service, 

make these simple checks. 

 

 

 

  

• Check whether power cord is properly connected into the  

    

  mains socket and to your TV. If there is still no power,     

    

  disconnect plug. Wait for 60 seconds and re-insert plug.    

    

  Switch on TV again.

   

• Press the 

 key on the remote control.

• Check antenna connection to the TV and to the wall antenna  

  (snowy noise) 

• Try manually adjusting your picture (see page 28).

• Have you chosen the right TV system? (see to page 28).

   

• Press the  

 

 key to check the signal strength.

• Verify if the supplied cables are connected properly (The

    

  aerial cable to the TV, the other aerial to your recorder, the  

   

  power cables,....).

    

• Verify if you have selected the correct source.    

• Verify if the child lock has been switched off.

• Check whether the correct TV system is selected (see page 28).

 

• Verify if the volume is not at the minimum.

    

• Check that the mute (   ) mode is not on. If mute mode  

    

  is on, press the 

 key to deactivate mute mode.   

    

• Verify the connections between the optional equipment and  

   

  the TV.

• Try switching off any electrical appliances to prevent  

 

    

  interference, for example, hairdryer, vacuum cleaner. 

 

 • 

Press the  

 

key to exit menu from screen.

  the selected language 
  on screen to operate • 

Press 

the 

  

key again to display menu.

 

 

• Press the   key to select the second item on the menu and    

  

  the   key to enter into the next menu level.

   

• Press the   key again and use the    key to select the fifth   

   

  menu item.

   

• Press the   key to enter into the next menu level.

    

• Press the Î ï keys to select correct language.

   

• Press the 

 key to confirm selection.

   

• Press the  

 

key to exit menu. 

• Move  closer to the receiver at the front of the TV.

   to remote control 

• Check the placement of the batteries.

• Try changing the batteries.