Philips 32pfl5615d User Manual
EN 37
En
gl
is
h
3. Select Technical data > Dimensions.
Navigate to the last page of this section, and
note the version number.
Note: The version number is a 12 digit
number, where the last digit indicates the
version of Help installed in your TV. For
example, if the version in the TV is '3139
137 03583', '3' represents the version of
Help currently installed.
1. Insert the empty USB flash drive into a
USB connector on your PC.
2. On your PC, create a folder named
„upgrades‟ in the root directory of the USB
flash drive.
3. In your web browser, navigate to
Navigate to the last page of this section, and
note the version number.
Note: The version number is a 12 digit
number, where the last digit indicates the
version of Help installed in your TV. For
example, if the version in the TV is '3139
137 03583', '3' represents the version of
Help currently installed.
1. Insert the empty USB flash drive into a
USB connector on your PC.
2. On your PC, create a folder named
„upgrades‟ in the root directory of the USB
flash drive.
3. In your web browser, navigate to
4. At the Philips Support site, find your
product and locate the Help file for your TV.
The Help file (a *.upg file) is compressed
into a *.zip archive.
product and locate the Help file for your TV.
The Help file (a *.upg file) is compressed
into a *.zip archive.
5. If the Help file at the Philips Support site is
a later version than the file in your TV, click
it to save the file to the USB flash drive.
6. Using the archive utility, extract the *.zip
file to the „upgrades‟ folder in the USB flash
drive.
7. The *.upg Help file is extracted.
8. Disconnect the USB flash drive from the
PC.
a later version than the file in your TV, click
it to save the file to the USB flash drive.
6. Using the archive utility, extract the *.zip
file to the „upgrades‟ folder in the USB flash
drive.
7. The *.upg Help file is extracted.
8. Disconnect the USB flash drive from the
PC.
Do not switch off the TV or remove
the USB flash drive during the update.
the USB flash drive during the update.
If a power failure occurs during the
update, do not remove the USB flash
drive from the TV. The TV will continue
the update as soon as power is
restored.
update, do not remove the USB flash
drive from the TV. The TV will continue
the update as soon as power is
restored.
If an error occurs during the update,
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
retry the procedure. If the error
reoccurs, contact Philips Consumer
Care.
1. Switch on the TV.
2. Connect the USB flash drive containing
2. Connect the USB flash drive containing
the *.upg Help file to the USB connector on
the TV. Disconnect all other USB devices
from the TV.
3. Press .
the TV. Disconnect all other USB devices
from the TV.
3. Press .
4. Select [Setup] > [Software settings] >
[Local updates].
The updates screen appears.
[Local updates].
The updates screen appears.
5. Select the '*.upg' Help file and press OK.
A message will display the update status.
Follow the on-screen instructions to
complete the update and restart your TV.
A message will display the update status.
Follow the on-screen instructions to
complete the update and restart your TV.
Reinstall the TV
Reinstalling your TV resets all picture and
sound settings, and reinstalls all TV channels.
1. Press .
sound settings, and reinstalls all TV channels.
1. Press .
2. Select [Setup] > [TV settings] >
[Reinstall TV], then press OK.
3. Follow the on-screen instructions.
[Reinstall TV], then press OK.
3. Follow the on-screen instructions.