Philips act7580 User Manual
POWER SUPPLY
9
Only use the AY 3170 power adapter
(4.5V/300mA direct current, positive pole to the
center pin). Any other product may damage the
player.
(4.5V/300mA direct current, positive pole to the
center pin). Any other product may damage the
player.
1 Make sure the local voltage corresponds to the
adapter’s voltage.
2 Connect the power adapter to the 4.5V DC
socket of the player and to the wall outlet.
Notes: – Always disconnect the adapter when you are not using it.
– No acoustic feedback is available when using the adapter.
1 Make sure you insert the rechargeable ECO-PLUS NiMH batteries AY 3362.
2 Connect the power adapter to the 4.5V DC socket of the player and to the
wall outlet.
3 If necessary press
9 once or twice until the player is
switched off.
y
a is shown and CHArGE is displayed.
• The approximate charging time is 5 hours.
4 When the batteries are fully recharged, a is
shown and FULL is displayed.
Note: It is normal for the battery pack to become warm
during recharging.
Recharging the AY 3362 ECO-PLUS NiMH batteries
Power adapter
(supplied or optionally available)
English