Philips az2010 User Manual

6

Adjust the source selector to your desired sound source: 
OFF/ TAPE, TUNER, CD.

Adjust the sound using the VOLUME, INCREDIBLE
SURROUND and 

BASS  controls.

To switch off the set, adjust the source selector to OFF/TAPE
position and check that the cassette keys are released.

Note: When the set is switched off the tuner presets will be

retained in the set's memory.

Adjust the source selector to TUNER.

Press BAND once or more to select your wave band.

To tune to radio stations, press the SEARCH controls 

∞ or

§ until the frequency in the display starts running, then
release the control.

– Srch appears in the display and the radio automatically

tunes to a station of sufficient reception.

Repeat if necessary until you find the desired station.

• To tune a weak transmitter, briefly press 

∞ or § until

you have found optimum reception or the correct frequency.

– When STEREO appears in the display, you are receiving a

FM-stereo transmitter.

To improve radio reception
• For 

, pull out the telescopic aerial. Incline and turn the

aerial. Reduce its length if the signal is too strong (very close
to a transmitter).

• For 

, the set is provided with a built-in aerial so the

telescopic aerial is not needed. Direct the aerial by turning
the whole set.