Philips bclever sv1 User Manual

Set up adjustments
The projector is equipped with the following functions to optimize its use and handling:

Press Menu and select ‘Set up’ in the menu bar.The following settings/adjustments can now
be made for both Data, Component and Video/S-video input, following the instructions
under ‘General explanation’ and the screen:
– Language

to select the required menu language;

to reduce/enlarge the size of the projected picture;

to correct picture distortion of the vertical keystone type by internal scaling.

enables image on second monitor connected;

to mirror the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;

to select between YPbPr and RGBsog as component input source;

to switch off SmartSave mode or select the delay time after which the projector
automatically switches to Standby.

to suppress OSD feedback messages. Warning or error messages however are never
suppressed;

to show the operating time of the lamp, which can be reset after a new lamp has been
installed;

the System Information sub menu contains an overview of the most relevant projector
information, including information on the hardware and software configuration;

to reset all user settings to the default factory settings;

English User guide  bClever SV1

On Screen Display Menu >