Philips divx ultra hts3101 User Manual

44

WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, fi rst check the points listed below before taking the system for repair. If
you are unable to solve a problem by following these instructions, consult your dealer or
Philips for help.

–  Check if the AC power cord is properly connected.
– Press the 2(STANDBY ON) on the front of the 

DVD system to turn on the power.

–  Refer to your TV’s manual for correct Video In 

channel  selection. Change the TV channel until you 
see the DVD screen.

–  Press the DISC button to select disc mode.
–  If this happens when you are turning on the progressive 

scan feature, wait for 15 seconds for the auto recovery.

–  If this happens when you are changing the setting of the  

‘TV TYPE’, wait for 15 seconds for the auto recovery.

–  Check the video connection.
–  Sometimes a small amount of picture distortion may  

 appear. This is not a malfunction.

– Clean the disc.

–  Adjust the volume.
–  Check the speaker connections and settings.
–  Make sure that the audio cables are connected and 

press the SOURCE button to select the correct input 
source (for example, TV or AUX/DI) to choose the 
device that you want to hear through the DVD system.

–  Make sure that the centre and rear speakers are 

connected correctly.

–  Press the SURR. button to select a correct surround 

sound  setting.

–  Make sure that the source you are playing is recorded or 

broadcast in surround sound (DTS, Dolby Digital, etc.).

–  Select the source you want to play (for example, 

DISC or TUNER) before pressing the function button 
(X, ./ >).

–  Reduce the distance between the remote control and 

the system.

–  Replace the batteries with new ones.
–  Point the remote control directly toward the IR sensor.
–  Check that the batteries are loaded correctly.