Philips FR755 User Manual

1 Press POWER / STANDBY to switch on the receiver.

2 Turn SOURCE SELECTOR to select a source.

y

The name of the source is displayed.

• You can select the FRONT AV/GAME input by pressing

FRONT AV (FR 755 only).

3 Start playback of the source as usual.

• Turn VOLUME to adjust the volume.

y

VOLUME and the volume level between 0 and 50 is
displayed.

1 Press BASS or TREBLE.

y

BASS or TREBLE and the actual value are displayed
briefly. Then 

TURN VOLUME KNOB TO CHANGE is

scrolled.

2 Turn VOLUME to adjust the bass or treble.

y

BASS or TREBLE and the actual value are displayed.

Note : If VOLUME is not turned within 5 seconds or if any

other control is used, the bass or treble adjustment is
switched off.

• Press ±SMART SOUND on the remote control to scroll

through the built-in smart sounds: 

MOVIE, SPEECH,

MUSIC, MULTIMEDIA and PERSONAL.
(

PERSONAL is the userdefined bass and treble setting.)

y

is displayed and the name of the chosen

sound profile is scrolled once if smart sound is on.

• Press LOUDNESS to switch loudness either on or off.

y

is displayed if loudness is on.

If you wish to record from a source you must select it with
SOURCE SELECTOR. The incoming signal is reproduced by all
audio and – if the source includes a video signal – video
outputs of the receiver. The sound settings do not affect the
recording.

1 Turn SOURCE SELECTOR (or press FRONT AV – FR 755 only)

to select the source you want to record from.

y

The name of the source is displayed.

2 Prepare the desired recording appliance. It must be

connected to one of the outputs of the receiver.

3 Start recording on the recording appliance.

4 Start the playback of the source as usual.

Notes: – The audio and video signal of VCR IN is not

reproduced by VCR OUT. The same applies to the
audio signal of CDR/TAPE IN to CDR/TAPE OUT.

– From a source which is connected to the

6 CHANNEL / DVD IN

audio input cannot be

recorded.