Philips fw-c399-21m User Manual
25
English
3139 115 21121
1
Press and hold
CLOCK•TIMER for more than
two seconds to select timer mode.
➜ "
➜ "
AM 12:00" or "00:00" or the last timer
setting starts flashing.
➜
➜
TIMER
starts flashing.
➜ The selected source will be lighted while
other available sources are flashing.
other available sources are flashing.
2
Press
CD, TUNER or TAPE to select the
desired source.
● Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
3
Press à or á on the system repeatedly to set
the hour for the timer to start.
the hour for the timer to start.
4
Press í or ë on the system repeatedly to set
the minute for the timer to start.
the minute for the timer to start.
5
Press
CLOCK•TIMER to store the start time.
➜
TIMER
remains on the display.
● At the preset time, the selected source will play.
To exit without storing the setting
● Press Çon the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Deactivating the timer
1
Press and hold
CLOCK•TIMER for more than
two seconds.
2
Press Ç on the system to cancel the timer.
➜ "
➜ "
OFF" is displayed and the
TIMER
disappears.
Activating the timer (for the same preset
time and source)
time and source)
1
Press and hold
CLOCK•TIMER for more than
two seconds.
2
Press
CLOCK•TIMER again to store.
➜
TIMER
is shown.
Sleep timer setting
The sleep timer enables the system to switch to
standby mode automatically at a preset time.
standby mode automatically at a preset time.
1
Press
SLEEP on the remote control repeatedly
to select a preset time.
➜ The selections are as follows (time in
minutes):
➜ The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15 …
➜ "
SLEEP XX" or "OFF" is displayed. "XX" is
the time in minutes.
2
When you reach the desired length of time, stop
pressing the
pressing the
SLEEP button.
➜
SLEEP
is shown, except for "
OFF" mode.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
switches to standby mode, a countdown of 10
seconds is displayed.
"
SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To check the remaining length of time
after sleep timer is activated
after sleep timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
➜ The display will show the next sleep timer
options.
To deactivate the sleep timer
● Press SLEEP repeatedly until "
OFF" is displayed,
or press the
STANDBY ON button.
Clock/Timer
pg 001-028/C399/21-Eng
4/16/02, 4:57 PM
25