Philips hts3090 User Manual

42

WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, fi rst check the points listed below before taking the system for repair. If
you are unable to solve a problem by following these instructions, consult your dealer for 
help.

–  Check if the AC power cord is properly connected.
– Press the 2 (STANDBY ON) to turn on the power.

–  Refer to your TV’s manual for correct Video In 

channel  selection. Change the TV channel until you 
see the DVD screen.

–  Press the DISC button to select disc mode.
–  If this happens when you are turning on the 

progressive scan feature, wait for 15 seconds for the 
auto recovery.

–  If this happens when you are changing the setting of 

the  ‘TV SYSTEM’, wait for 15 seconds for the auto 
recovery.

–  Check the video connection.
–  Sometimes a small amount of picture distortion may  

 appear. This is not a malfunction.

– Clean the disc.

–  Adjust the volume.
–  Check the speaker connections and settings.
–  Make sure that the audio cables are connected and 

press the SOURCE button to select the correct input 
source (for example, TUNER or TV/AUX/DI) to 
choose the device that you want to hear through the 
DVD system.

–  When playback of DTS track, press AUDIO to select 

other audio track.

–  Make sure that the center and rear speakers are 

connected correctly.

–  Press the SURR. button to select a correct surround 

sound setting.

–  Make sure that the source you are playing is recorded 

or broadcast in surround sound (Dolby Digital, etc.).