Manualsbrain.com
  1. Manuals
  2. Brands
  3. Philips
  4. HTS8000S
  5. User Manual

Philips HTS8000S User Manual

Download
Page of 47
12
3139 115 2xxx1
English
Optional Connections 
(continued)
IMPORTANT!
The progressive scan video quality is
only possible when using Y Pb Pr and
a progressive scan TV is required.
1
Use the component video cables (red/
blue / green - not supplied) to connect the
Junction Box’s Y Pb Pr sockets to the
corresponding component video input
sockets (or labelled as Y Pb/Cb Pr /Cr or
YUV) on the TV.
2
To hear the TV channels through this
DVD system, connect the audio cables
(white / red) from the Junciton Box to the
corresponding AUDIO OUT sockets on
the TV.
●
Do not connect the video cable from
Junction Box to your TV.
3
Proceed to pages 18~19 for detailed
Progressive Scan set up.
Connecting to a Progressive
Scan TV
If the FM reception is poor, you can use
an FM coaxial cable (not supplied) to
connect the FM 75
Ω coaxial cable hidden
inside the back cover to the outdoor FM
antenna terminal.
1
Open the main DVD system’s back cover
by lifting up the cover from the bottom.
2
Unplug the FM pigtail antenna from the
FM 75
Ω coaxial cable.
3
Connect the FM 75
Ω coaxial cable to
one end of the FM coaxial cable which is
connected to the outdoor FM antenna
terminal.
Helpful Hint:
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
Junction box
Connecting to outdoor FM
antenna terminal
FM Antenna
3
2
1
1
2
FM pigtail
cable
001-047-hts8000s-98-Eng4
3/3/05, 3:42 PM
12