Philips HTS8000S User Manual

33

3139 115 2xxx1

The underlined option is the factory default setting.
To return to the previous menu, press 

1.  To remove the menu, press SETUP MENU.

1

In disc mode, press SETUP MENU.

2

Press 

1 2 to select ‘Video Setup Page’.

3

Press OK to confirm.

This menu contains the options for
selecting the colour system that matches
the connected TV.  For details, see page
20.

This menu contains the options for
setting the aspect ratio of the DVD
system according to the connected TV.
For details, see page 20.

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers.  It only works when you have
connected the DVD system’s Y Pb Pr
sockets to your TV that supports the
progressive video input.  Otherwise, the
image may not appear or will be
distorted.  For proper progressive scan
set up, see pages 18~19.

IMPORTANT!
Before enabling the progressive scan
function, you must ensure :
1) Turn on your TV progressive scan

function (refer to your TV owner’s
manual).

2) You have connected the DVD system

to your TV using Y Pb Pr (see page 12).

1

In ‘Video Setup Page’, use 34 keys to
highlight { Progressive }, then press 

2.

{ Off }

Select this to disable progressive scan function.

{ On }

Select this to enable progressive scan function.

2

Use 34 keys to select a setting and press
OK to confirm.

➜

Follow the instructions shown on the

TV to confirm the selection (if any).

➜

If a blank/distorted TV screen appears,

wait for 15 seconds for the auto
recovery.

001-047-hts8000s-98-Eng4

3/3/05, 3:47 PM

33