Philips mc230e User Manual
English
3140 115 xxxxx
17
Clock/Timer
Setting the clock
1
In standby mode or system on, press and hold
CLOCK SET on the remote control for more
than 3 seconds.
➜
CLOCK SET on the remote control for more
than 3 seconds.
➜
SET CLOCK scrolls on the display.
➜ The clock digits for the hours flash.
2
Press
VOLUME +/- to set the hours.
3
Press
CLOCK SET again.
➜ The clock digits for the minutes flash.
4
Press
VOLUME +/- to set the minutes.
5
Press
CLOCK SET to confirm the time.
Viewing the clock
Press
CLOCK SET
➜ The clock time is displayed.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER is switched on at a set
time. The clock time needs to be set first before
the timer can be used.
time. The clock time needs to be set first before
the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
automatically.
1
In standby mode or system on, press and hold
TIMER on the remote control for more than 3
seconds.
➜
TIMER on the remote control for more than 3
seconds.
➜
SET TIMER and SELECT SOURCE scrolls
on the display.
2
Press
SOURCE or VOLUME +/- to select
sound source.
➜ Display sequence shows
➜ Display sequence shows
CD, TUNER.
➜
flashes.
3
Press
TIMER to confirm your desired mode.
4
Press
VOLUME +/- to set the hours.
5
Press
TIMER again.
➜ The clock digits for the minutes flash.
6
Press
VOLUME +/- to set the minutes.
7
Press
TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
TIMER
●
Press
TIMER on the remote to turn off the
timer or turn on to the last setting again.
➜ If activated, the timer information will display
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜ If deactivated, “
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜ If deactivated, “
OFF” appears.
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Activating and deactivating
SLEEP
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
by itself after a set period of time.
● Press SLEEP on the remote control once or
more.
➜ Display shows
➜ Display shows
SLEEP and
one of the sleep time options
in sequence:
in sequence:
90, 75, 60,...,
45,30,15, OFF, 90. if you have
selected a time. Once SLEEP is
activated,
selected a time. Once SLEEP is
activated,
SLEEP is display.
● To deactivate, press SLEEP on the remote
control once or more until
OFF is shown, or
press
STANDBY-ON on the system or
remote control.