Philips MC-i250 User Manual

38

– Remove the AC power plug for one minute.

Then reconnect and switch on the system again.

– Adjust the volume.

– Disconnect the headphones.
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped

into the speaker terminal.

– Make sure the MP3-CD was recorded within

32-256 kbps bit rate with sampling frequencies
at 16 kHz, 22,05 kHz, 24 kHz, 32 kHz, 44,1 kHz
or 48 kHz.

– Check the speaker connections and location.

– Select the source (CD or TUNER, for example)

before pressing the function button (É,í,ë).

– Reduce the distance between the remote

control and the system.

– Insert the batteries with their polarities

(+/- signs) aligned as indicated.

– Replace the batteries.
– Point the remote control directly toward the

IR sensor on the front of the system.

– Set the clock correctly.
– Press TIMER ON / OFF to switch on the timer.

– Press DIM to select DIM OFF display mode.

– Power has been interrupted or the power cord

has been disconnected. Reset the clock/timer.