Manualsbrain.com
  1. Manuals
  2. Brands
  3. Philips
  4. MCM239D
  5. User Manual

Philips MCM239D User Manual

Download
Page of 28
English
13
Preparation
Setting the clock
After connecting MCM239D to the power
supply, set the clock first.
1
 Press and hold 
STANDBY-ON to switch the
set to Standby mode.
 ➜ 
The display shows the set time.
➜ 
-- --:-- -- flashes by default if you have not set
the clock.
2
In the standby mode, press and hold 
DISPLAY/
CLOCK.
➜
SET CLOCK scrolls on the display
➜
24 HR or 12 HR appears for the initial
clock setting. To select 24-hour clock or
12-hour clock,
a. Press VOLUME +/- .
b. Press CLOCK to confirm
➜ 
The hours digits start flashing
3
Hold down or press 
VOLUME +/- repeatedly
to set the hours.
4
Press 
DISPLAY/CLOCK to confirm
➜
The minutes digits start flashing
5
Hold down or press 
VOLUME +/- repeatedly
to set the minutes.
6
Press 
DISPLAY/CLOCK to confirm
–  To exit without storing the clock setting press
STOP 
9
Helpful hints:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The set will exit from the clock setting mode if
no button is pressed within 90 seconds.
Using the remote control
IMPORTANT!
– Remove the
protective plastic tab
before using the
remote control.
– Always point the
remote control directly
towards IR area on the Center or Station
you wish to operate.
Notes for remote control:
– First select the source you wish to
control by pressing one of the source select
keys on the remote control (for example
CD, TUNER).
– Then select the desired function (for
example 
ÉÅ, í , ë).
To replace the remote controls’
battery
CAUTION!
– Remove the battery if it is exhausted
or will not be used for a long time.
– Batteries contain chemical substances,
so they should be disposed of properly.
1
Push to open the battery tray.
2
Replace a new battery according to the
indicated polarity.
3
Push the battery tray back to close it.
MCM239D_79_Eng 
23/8/07, 9:53
13