Hitachi 8755H User Manual

ENGLISH

Connecting power supply

Put the connector of the power cord into the

AC inlet of the projector.

Firmly plug the power cord’s plug into the

outlet.

WARNING ►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in fire and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

to your dealer to newly get correct one.

• Only plug the power cord into an outlet whose voltage is matched to the power

cord. The power outlet should be close to the projector and easily accessible.

Remove the power cord for complete separation.

• Never modify the power cord.

Turning on the power

Make sure that the power cord is firmly and

correctly connected to the projector and the

outlet.

Remove the lens cover, and set the power

switch to the ON position (marked “׀”).

Press the STANDBY/ON button on the

projector or the remote control.

The projection lamp will light up and the POWER

indicator will begin blinking in green. When the

power is completely on, the indicator will stop

blinking and light in steady green.

WARNING ►A strong light is emitted when the projector’s power is on. Do not look into

the lens of the projector or look inside of the projector through any of the projector’s openings.

NOTE • Please power on the projector prior to the connected devices.

• When the AUTO ON of the OPTION menu is set to the TURN ON, and the

power was turned off by the power switch last time, turning the power switch on

makes the projection lamp light on without pushing the STANDBY/ON button.

For more information, please see the “Operating Guide” in the CD.

AC inlet

Power cord

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH BLANK

MUTE

MY BUTTON

POSITION

ESC

ENTER

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

VOLUME

DOWN

࡯

OFF

㧗

FREEZE

STANDBY/ON button

POWER indicator

Power switch