Philips WP3811 User Manual

Apart from the recommended cartridge lifetime, Philips’ unique

cartridge replacement indicator helps you determine when to replace

the filter cartridge.

The 2ltrs/min high-speed initial flow rate gives you a plenty of clean

water instantly.

The water selection lever offers you a choice of three water flow

types: unfiltered spray, unfiltered stream or filtered spray.

The eight tap-mounting adapters supplied with the water purifier

allow easy installation on almost any type of tap.

The bayonet-type mount ensures quick, easy and secure filter

cartridge replacement.

Before installation
Before you install the water purifier, make sure all tap-mounting

adapters you require are present.

The tap must have a diameter of 13mm-25mm.

Determine what type of tap you have and select the appropriate

adapter.

The adapters supplied make the water purifier suitable for almost

any kitchen tap. However, the water purifier may not fit some

uncommon types of taps.

The tap water pressure has to be between 0.7kgf/cm² (7 metres of

water column) and 3.5kgf/cm² (35 metres of water column). If you

use the water purifier at a water pressure outside this range, either

the filtered water flow will be extremely low or the water purifier

will get damaged.
installation a-type adapter

For taps with a round spout with a diameter of 16mm, 17.5mm or

19mm (Fig. 2).

 1 

 Remove the attachment nut and the adapter from the water 

purifier housing (Fig. 3).

  

 Pass the attachment nut over the tap spout (Fig. 4).

-

-

-

-

-

-

-

-

-

-

-

8