Philips WAK3300 User Manual
19
En
g
lis
h
Installation
3
a. Press the navigation controls
3 or 4 and 2
to select the network where the UPnP
device is located
device is located
b. Set the Encryption key:
b1. Enter the Encryption key (WEP or
WPA) using the alphanumeric keys if
you have already set an Encryption key
for your network
you have already set an Encryption key
for your network
or
Press the navigation controls
3 or 4
repeatedly to select a letter, digit or
symbol
symbol
b2. Press OK to confirm
c. Select Auto (DHCP)
Helpful hints:
–
Helpful hints:
–
You can also select
Static IP and assign an IP
address as prompted using the alphanumeric keys.
d. Select No when the Enable Proxy
Server screen appears
e. Select Yes to apply the setting
➜
The WAK3300 will be restarted
➜
The main menu will appear when
WAK3300 is connected to the UPnP
server
server
4
To select another network
a. press HOME to enter the main menu
b. press the navigation controls
a. press HOME to enter the main menu
b. press the navigation controls
3
or
4
and
2
to select
Setting
c. Use the navigation controls
3
or
4
and
2
to select
Network followed by Quick
Setup
➜
The
Select Network screen appears
➜
Searching... appears when the set is
searching for available networks
searching for available networks
➜
The list of networks appears
5
Follow the above-mentioned
Step 3
If you are using a wired Access Point
1
On the WAK3300, press the navigation
controls
controls
3 or 4 and 2 to select UPnP Music
Server
➜
Wired Ethernet will appear at the
bottom of the screen
2
Press
2 to enter the setup menu of Wired
Ethernet
a. Select Auto (DHCP)
b. Select No when the Enable Proxy
a. Select Auto (DHCP)
b. Select No when the Enable Proxy
Server screen appears
c. Select Yes to apply the setting
➜
The WAK3300 will be restarted
➜
The main menu will appear when the
WAK3300 is connected to the UPnP
server
WAK3300 is connected to the UPnP
server