Pelco PA101 User Manual

 

C250M-E (12/05)

3

 

1. Position the pole mount adapter on the pole and attach it to the pole with the stainless steel straps provided. Tighten the strap screws 

securely.

2. Attach your mount to the pole mount adapter with the provided nuts and washers and securely tighten.

3. If you are using the WM2000 wall mount and require an ST1 support strut for additional support, install an SPA102 pole mount adapter. 

Measure 14 inches (36 cm) down from the bottom of the WM2000 and mark the pole. Center the SPA102 on the pole at the mark and attach 
the SPA102 to the pole with the stainless steel straps provided. Tighten the strap screws securely. Attach the support strut wall swivel to 
the SPA102 with the provided nuts and washers and securely tighten. Attach the ST1 clamp swivel to the WM2000 with the stainless steel 
clamp (supplied) and securely tighten.

 

Typical Pole Mount Adapter Installation

 

Construction

Aluminum

Finish

Gray polyester powder coat

Dimensions

PA100

8.00” H x 3.00” W (20.32 x 7.62 cm)

PA101

5.00” H x 4.00” W (12.70 x 10.16 cm)

PA102

12.78” H x 7.00” W (32.45 x 17.78 cm)

SPA102

6.50” H x 7.00” W (16.51 x 17.78 cm)

Weight

PA100

0.9 lb (0.4 kg)

PA101

0.9 lb (0.4 kg)

PA102

3.4 lb (1.5 kg)

SPA102

1.8 lb (0.8 kg)

FLAT WASHER

LOCK WASHER

NUT

FLAT WASHER

LOCK WASHER

NUT

WM2000

WALL MOUNT

STAINLESS

STEEL CLAMP

CLAMP SWIVEL

ST1
SUPPORT STRUT

SPA102 POLE
MOUNT ADAPTER

STAINLESS
STEEL STRAP

ST1
SUPPORT STRUT

STAINLESS
STEEL STRAP

PA102 POLE
MOUNT ADAPTER