honda-automobiles 2010 pilot User Manual
Turn the jack dial (wheel nut
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
and remove the jack.
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
16.
17.
18.
19.
CONTINUED
Changing a Flat Tire
T
a
k
ing
Ca
re
Ca
re
of
th
th
e
U
ne
x
x
p
e
c
te
d
513
BRAKE HUB
０９／０３／１３ １６：３４：３４ ３１ＳＺＡ６１０ ０５１８
2010 Pilot