Hitachi c28w460n User Manual

- 9 -

as you change the language, the menu items will be

displayed in the selected language.

By pressing the or buttons, come to the

Tuning Mode item and select the mode at which your

TV will run the A.P.S.. If you select Channel Tuning

Mode, A.P.S. will run according to Channel Tuning

Mode and will auto-search according to the Channel

numbers of the stations in your area. If you select Fre-

quency Tuning Mode, A.P.S. will run according to

Frequency Tuning Mode and will auto-search accord-

ing to the frequencies of the stations in your area.

After selecting the Tuning Mode if you want to start

A.P.S., by pressing the up and down buttons, come to
the Start item and by pressing

button

start the A.P.S..

If you do not want to start A.P.S., you can cancel it by

pressing the TV button on your remote control.

When you start A.P.S. the below menu will appear on

the screen.

$36 ,6 5811,1*

3/($6( :$,7

&$1&(/

Operating with the buttons on the TV set

Volume setting and programme selection can be made

using the buttons on the front of the TV.

Volume Setting

Press -

button to decrease volume or

button to increase volume, so a volume level scale

(slider) will be displayed in the lower middle side of the

screen.

Programme Selecting

Press P/CH+ button to select the next programme

or -P/CH button to select the previous programme.

Entering MENU

Press MENU button to enter the MENU. In the MENU

select sub-menu using -P/CH or P/CH+ button and

enter the sub-menu using -

+ button. To

learn the usage of the menus, refer to the Menu Sys-

tem section.

Operating with Remote Control

The remote control handset of your TV is designed to

control all the functions of the model you selected. The

functions will be described in accordance with the menu

system of your TV.
Functions of the menu system are described in Menu

System section.

Volume Setting

Press

button to increase volume. Press

but-

ton to decrease volume. A volume level scale (slider)

will be displayed at the middle of the bottom on the

screen.

Programme Selecting (Previous or next

programme)

Press button to select the previous programme.
Press button to select the next programme.

Programme Selecting (direct access)

Press digit buttons on the remote control handset to

select programmes between 0 and 9. TV will switch to

the selected programme. To select programmes between

10 - 99, you must use the double digit button

- -.

this OSD is displayed at the left hand upper on

this screen.
Press the digit buttons consecutively for the channel

you wish to watch (e.g for channel 27, first press 2 then

7). If you do not press the second digit within 3 sec-

onds of pressing the first, the display will disappear.

2853W-1244UK-ENG-ST7P-AK45-PLL-FS-CLED-50051552.p65

13.07.2004, 10:54