Mercedes Benz 2003 cl 600 User Manual
255
Operation
Maintenance
Calling up the service indicator
왘
Switch on the ignition.
The standard display of the control sys-
tem appears (
tem appears (
왘
Press button k or j on the mul-
tifunction steering wheel until FSS indi-
cator with the service symbol 9 or
´ and the service deadline appears
in the multifunction display.
tifunction steering wheel until FSS indi-
cator with the service symbol 9 or
´ and the service deadline appears
in the multifunction display.
Resetting the service indicator
In the event that the service on your vehi-
cle is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
cle is not carried out by an authorized
Mercedes-Benz Center, you can reset the
service indicator yourself.
왘
Switch on the ignition.
The standard display of the control sys-
tem appears (
tem appears (
왘
Press button k or j on the mul-
tifunction steering wheel until the FSS
indicator with the service symbol 9
or ´ and the service deadline ap-
pears in the multifunction display.
tifunction steering wheel until the FSS
indicator with the service symbol 9
or ´ and the service deadline ap-
pears in the multifunction display.
왘
Press the reset button
J (
in the instrument cluster for about four
seconds.
seconds.
This message appears in the multifunc-
tion display:
tion display:
SERVICE INTERVAL?
RESET WITH R BUTTON
RESET WITH R BUTTON
왘
To confirm, hold down the reset button
until you hear a signal.
until you hear a signal.
The service indicator now displays the
reset interval.
reset interval.
i
If the battery is disconnected, the days
of disconnection will not be included in
the count shown by the service indica-
tor. To arrive at the true service dead-
line, you will need to subtract these
days from the days shown in the ser-
vice indicator.
of disconnection will not be included in
the count shown by the service indica-
tor. To arrive at the true service dead-
line, you will need to subtract these
days from the days shown in the ser-
vice indicator.
Do not confuse the service indicator
with the engine oil level indicator :.
with the engine oil level indicator :.
i
If the service indicator was inadvertent-
ly reset, have a Mercedes-Benz Center
correct it.
ly reset, have a Mercedes-Benz Center
correct it.
Only reset if the proper service has
been performed. Resetting the system
without performing proper service as
called for by the FSS will cause the FSS
to incorrectly determine the next ser-
vice interval which will result in engine
damage not covered by the
Mercedes-Benz Limited Warranty.
been performed. Resetting the system
without performing proper service as
called for by the FSS will cause the FSS
to incorrectly determine the next ser-
vice interval which will result in engine
damage not covered by the
Mercedes-Benz Limited Warranty.