Mercedes Benz 2003 cl 600 User Manual
47
Getting started
Driving
Windshield wipers
The combination switch is on the left of the
steering column.
steering column.
Combination switch
1 Single wipe
2 Switching on windshield wipers
2 Switching on windshield wipers
왘
Make sure that the ignition is switched
on.
on.
Switching on windshield wipers
왘
Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
sired position depending on the inten-
sity of the rain.
0 Windshield wipers off
I
Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Single wipe
왘
Press switch briefly in the direction of
arrow 1.
arrow 1.
The windshield wipers wipe one time
without washer fluid.
without washer fluid.
Wiping with windshield washer fluid
왘
Press switch in the direction of arrow 1
past the resistance point.
past the resistance point.
The windshield wiper operates with
washer fluid.
washer fluid.
i
The intermittent wiping interval is de-
pendent on wetness of windshield.
Wiping will not occur with a door open.
pendent on wetness of windshield.
Wiping will not occur with a door open.
!
Do not leave windshield wipers in inter-
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.
The switch should not be left in inter-
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass when wiping occurs on a dry
windshield.
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass when wiping occurs on a dry
windshield.
컄컄