Mercedes Benz 2003 cl 600 User Manual

96

Controls in detail

Seats
Seats

Information on seat adjustment can be 
found in the “Getting started” section 
(

You can adjust the contour of the seat’s 
lumbar support to best support your back.

The thumbwheels for the driver’s and front 
passenger’s seat are on the inner side of 
the seat.

1 Thumbwheel

왘

Make sure the ignition is switched on.

All the lamps in the instrument cluster 
should light up.

왘

Set the lumbar support between 0 
and 5.

With the easy-entry/exit feature activat-
ed, the steering wheel tilts upwards and 
the driver’s seat moves to the rear.

This allows easier entry into and exit from 
the vehicle when the driver’s door is 
opened. However, the engine must be 
turned off.

When the SmartKey is inserted in the start-
er switch or you have pressed the 
KEYLESS-GO* start/stop button once and 
the driver’s door is closed, the steering 
wheel and the driver’s seat return to their 
last set positions.

You can activate the following functions:

앫

Steering column:

Only the steering column is adjusted. 

앫

Steering column and seat:

Both the steering column and the seat 
are adjusted.

The easy-entry/exit feature can be 
switched on or off in the in the settings 
menu of the control system (

G

You must make sure that no one can be-
come trapped or injured by the moving 
steering wheel and driver’s seat when the 
easy-entry/exit feature is activated, the 
driver’s door is being opened, and the en-
gine is turned off or the SmartKey removed 
from the starter switch. Do not leave chil-
dren unattended in the vehicle, or with ac-
cess to an unlocked vehicle. Unsupervised 
use of vehicle equipment may cause an ac-
cident and/or serious personal injury.