Mercedes Benz 2001 ml 55 amg User Manual

Page of 317
148
Tele Aid
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Tele Aid
Important!
The initial activation of the Tele Aid system may only be 
performed by completing the subscriber agreement and 
placing an acquaintance call using the “SOS” button. 
Failure to complete either of these steps will result in a 
system that is not activated. If the system is not 
activated the indicator lamp in the “SOS” button stays 
on after turning electronic key in starter switch to 
position 2 and the message “TELE AID – NOT 
ACTIVATED” will be shown in the MCS display for 
approx. 10 seconds.
If you have any questions regarding activation, please 
call the Response Center at 1-800-756-9018 (in the USA) 
or 1-888-923-8367 (in Canada).
(Telematic Alarm Identification on Demand)
The Tele Aid system consists of three types of response; 
automatic and manual emergency, roadside assistance 
and information.
The Tele Aid system is operational providing that the 
vehicle’s battery is charged, properly connected, not 
damaged and cellular and GPS coverage is available. 
The speaker volume of a Tele Aid call can be adjusted 
using the volume control on the MCS unit. To activate, 
press the “SOS” button, the Roadside Assistance 
button • or the Information button ¡, depending 
on the type of response required.
Shortly after the completion of your Acquaintance Call, 
you will receive a user ID and password via first call 
mail. By visiting www.mbusa.com and selecting 
“Tele Aid” (USA only), you will have access to account 
information, remote door unlock, Info Services
*
 profile 
and more.
* Optional
System self-check
Initially, after turning the key in steering lock to 
position 2, malfunctions are detected and indicated (the 
indicator lamps in the “SOS” button, the Roadside 
Assistance button • and Information button ¡ 
stay on longer than 10 seconds or do not come on). The 
message “TELE AID – PLEASE VISIT WORKSHOP” 
appears in the MCS display.