Mercedes Benz 2001 ml 55 amg User Manual

Page of 317
193
Driving instructions
Technical
data
Instruments 
and controls
Operation
Driving
Instrument 
cluster display
Practical hints
Car care
Index
Attaching a trailer
Please observe maximum permitted trailer dimensions 
(width and length).
Most states and all Canadian provinces require safety 
chains between your tow vehicle and the trailer. The 
chains should be crisscrossed under the trailer tongue. 
They must be attached to the hitch receiver, and not to 
the vehicle’s bumper or axle. Be sure to leave enough 
slack in the chains to permit turning corners.
Most states and all Canadian provinces require a 
separate brake system at various trailer weights.
Caution!
Do not connect a trailer brake system (if trailer is so 
equipped) directly to the vehicle’s hydraulic brake 
system, as your vehicle is equipped with antilock 
brakes. If you do, neither the vehicle’s brakes nor the 
trailer’s brakes will function properly.
The provided vehicle electrical wiring harness for trailer 
towing has a brake signal wire (color orange) for 
hook-up to a brake controller.
Most states and all Canadian provinces require a 
break-away switch on trailers with a separate brake 
system. The switch activates the trailer brakes in the 
possible event that the trailer might separate from the 
tow vehicle.
You should consider using a trailer sway control system. 
For further information see your authorized 
Mercedes-Benz Light Truck Center.