Mercedes Benz 2007 r 320 cdi User Manual

Page of 570
244
Controls in detail
3-zone automatic climate control*
Using driver-side settings for all 
temperature zones
You can use the settings of the driver’s 
side, such as temperature, air volume and 
air distribution, for all temperature zones. 
These settings only need to be made once 
and the automatic climate control system 
will automatically regulate the settings for 
all temperature zones quickly and comfort-
ably.
Activating
Adjust the temperature, air volume and 
air distribution (
Press button
; (
The indicator lamp on the button 
comes on.
The driver-side settings are used for all 
temperature zones.
Deactivating
Press button
; (
The indicator lamp on the button goes 
out.
Residual heat and ventilation
With the engine switched off, it is possible 
to continue to heat or ventilate the interior 
for up to 30 minutes. This feature makes 
use of the residual heat produced by the 
engine.
i
If you manually set the temperature, air 
volume or air distribution for the passenger side 
or the rear passenger compartment when the 
MONO setting is active, the MONO setting will 
be switched off.
i
How long the system will provide heating 
depends on 
the coolant temperature
the battery voltage
Regardless of the temperature and air volume 
set on the automatic climate control panel, an 
interior temperature is aimed at by 72°F (22°C) 
and the blower runs on low speed to protect the 
vehicle battery.