Mercedes Benz 2007 r 320 cdi User Manual

Page of 570
298
Controls in detail
Loading
Loading instructions
Load distribution
The gross vehicle weight which is the 
weight of the vehicle including fuel, tools, 
spare wheel, installed accessories, pas-
sengers, and luggage/cargo must never 
exceed the load limit and the Gross Vehicle 
Weight Rating (GVWR) for your vehicle as 
specified on the placard located on the 
driver’s door B-pillar (
page 526). In addi-
tion, the load must be distributed in such a 
way so that the weight on each axle never 
exceeds the Gross Axle Weight Rating 
(GAWR) for the front and rear axle. The 
GVWR and GAWR for your vehicle are indi-
cated on the certification label which can 
be found on the driver’s door B-pillar 
(
The handling characteristics of a fully 
loaded vehicle depend greatly on the load 
distribution. It is therefore recommended 
to load the vehicle according to the illustra-
tions shown, with the heaviest items being 
placed towards the front of the vehicle.
Warning!
G
Always fasten items being carried as 
securely as possible using cargo tie-down 
rings and fastening materials appropriate 
for the weight and size of the load.
In an accident, during hard braking or 
sudden maneuvers, loose items will be 
thrown around inside the vehicle, and can 
cause injury to vehicle occupants unless the 
items are securely fastened in the vehicle.
To help avoid personal injury during a 
collision or sudden maneuver, always use 
tie-down rings and, if so equipped, always 
use the partition net* when transporting 
cargo.
Never drive vehicle with the tailgate open. 
Deadly carbon monoxide (CO) gases may 
enter vehicle interior resulting in uncon-
sciousness and death.