Mercedes Benz 2010 ml-class hybrid User Manual
Make sure the cable clamps do not touch
any other metal part while the other end is
still attached to a battery.
any other metal part while the other end is
still attached to a battery.
Connecting the jumper cables
Your vehicle is equipped with two jump start
terminals in the engine compartment.
Position C represents the charged battery of
another vehicle or an equivalent starter pack.
terminals in the engine compartment.
Position C represents the charged battery of
another vehicle or an equivalent starter pack.
X
Make sure the two vehicles do not touch.
X
Switch off all electrical consumers.
X
Engage the parking brake.
X
Make sure the automatic transmission is in
park position
park position
P.
X
Open the hood, see Operators' Manual.
X
Flip up cover : of positive terminal = in
direction of arrow.
direction of arrow.
X
Connect positive terminal ; of charged
battery C with positive terminal = with a
jumper cable. Clamp the cable to positive
terminal ; of charged battery C first.
battery C with positive terminal = with a
jumper cable. Clamp the cable to positive
terminal ; of charged battery C first.
X
Slide cover A from negative terminal B in
direction of arrow.
direction of arrow.
X
Connect negative terminal ? of charged
battery C with negative terminal B with
battery C with negative terminal B with
a jumper cable. Clamp the cable to
negative terminal ? of charged battery
C first.
negative terminal ? of charged battery
C first.
Starting the combustion engine
X
Start the engine of the vehicle with the
charged battery and run it at an engine
speed slightly above idle speed.
charged battery and run it at an engine
speed slightly above idle speed.
X
Make sure the automatic transmission is in
park position
park position
P.
X
Starting the jump start process with
the SmartKey: To start the charging
process for the high-voltage battery, turn
the SmartKey in the starter switch first into
starting position
the SmartKey in the starter switch first into
starting position
3.
X
Turn the SmartKey back into ignition
position
position
2.
X
Starting the jump start process with
KEYLESS-GO: Depress the brake pedal
during the starting procedure.
34
Practical hints
164_ZA; 2; 2, en-US
d2ureepe,
d2ureepe,
Version: 2.11.8.1
2009-05-12T15:08:04+02:00 - Seite 34