bobcat s205 User Manual

Sometimes it may be necessary to store your Bobcat
Loader for an extend period of time. Below is a list of
items to perform before storage.

•

Thoroughly clean the loader including the engine
compartment.

•

Lubricate the loader.

•

Replace worn or damaged parts.

•

Park the loader in a dry protected shelter.

•

Lower the lift arms all the way and put the bucket flat
on the ground.

•

Put blocks under the frame to remove weight from the
tires.

•

Put grease on any exposed cylinder rods.

•

Put fuel stabilizer in the fuel tank and run the engine a
few minutes to circulate the stabilizer to the pump and
fuel injectors.

•

Drain and flush the cooling system. Refill with
premixed coolant.

•

Replace all fluids and filters (engine, hyd. / hydro.).

•

Replace air cleaner, heater and air conditioning filters.

•

Put all controls in neutral position.

•

Remove the battery. Be sure the electrolyte level is
correct then charge the battery. Store it in a cool dry
place above freezing temperatures and charge it
periodically during storage.

•

Cover the exhaust pipe opening.

•

Tag the machine to indicate that it is in storage
condition.

After the Bobcat Loader has been in storage, it is
necessary to follow a list of items to return the loader to
service. 

•

Check the engine and hydraulic oil levels; check
coolant level.

•

Install a fully charged battery.

•

Remove grease from exposed cylinder rods.

•

Check all belt tensions.

•

Be sure all shields and guards are in place.

•

Lubricate the loader.

•

Check tire inflation and remove blocks from under
frame.

•

Remove cover from exhaust pipe opening.

•

Start the engine and let run for a few minutes while
observing the instrument panels and systems for
correct operation.

•

Operate machine, check for correct function.

•

Stop the engine and check for leaks. Repair as
needed.