Mitsubishi diamond pro 710 User Manual
- 1 -
CAUTION
The power cord provided with this monitor is de-
signed for safety and must be used with a properly
grounded outlet to avoid possible electrical shock.
signed for safety and must be used with a properly
grounded outlet to avoid possible electrical shock.
Do not remove the monitor cabinet as this can
expose you to very high voltages and other hazards.
expose you to very high voltages and other hazards.
Trademark
E
NERGY
S
TAR
is a U.S. registered mark.
©
Mitsubishi Electric Corporation
1. INTRODUCTION ................................................... 2
1.1 Features ...................................................... 2
1.2 Internal Preset Memory Capability .............. 3
1.3 Power Management Function ..................... 3
1.4 DDC ............................................................ 3
1.5 Location Considerations ............................. 3
1.6 Cleaning Your Monitor ................................ 3
1.7 Unpacking ................................................... 4
1.8 Tilt/Swivel Base ........................................... 4
Screen Position Adjustment ........................ 4
1.9 Quick Operation Chart ................................ 4
2. PART NAME .......................................................... 5
2.1 Control Names ............................................ 5
2.2 Function ...................................................... 5
3. INSTALLATION AND CONNECTION ................... 6
3.1 AC Power Connection ................................. 6
3.2 Signal Cable Connection ............................ 6
3.2.1 Connecting to Any IBM VGA Compatible
System ................................................ 6
3.2.2 Connecting to An Apple Macintosh
Computer ............................................. 6
4. OSD(On Screen Display) FUNCTIONS ................ 7
4.1 How to adjust the screen ............................ 7
4.2 Adjustment Items ........................................ 7
5. TROUBLESHOOTING .......................................... 9
6. SPECIFICATIONS ................................................. 11
7. APPENDIX ............................................................. 12
7.1 Optional Macintosh Adapter AD-A205 Settings
................................................................... 12
CONTENTS
MANUFACTURER DECLARATION FOR CE-MARK-
ING:
We, Mitsubishi Electric Corp., declare under our sole
responsibility, that this product is in conformity with the
following standards:
ING:
We, Mitsubishi Electric Corp., declare under our sole
responsibility, that this product is in conformity with the
following standards:
EN60950
EN55022 Class B
EN50082-1
EN60555-2
EN61000-3-3
EN55022 Class B
EN50082-1
EN60555-2
EN61000-3-3
following the provisions of:
73/23/EEC Low Voltage Directive
89/336/EEC
89/336/EEC
EMC Directive
WARNING!
This product is not designed for use in life support
devices and Mitsubishi Electric Corp., makes no
representations to the contrary. Life support devices
are those devices which are used to measure, diag-
nose, or evaluate the tissue, systems or functions of
the human body; or other devices employed to support
or sustain life or good health.
This product is not designed for use in life support
devices and Mitsubishi Electric Corp., makes no
representations to the contrary. Life support devices
are those devices which are used to measure, diag-
nose, or evaluate the tissue, systems or functions of
the human body; or other devices employed to support
or sustain life or good health.