Metra Electronics 99-5717 User Manual

KIT COMPONENTS

KIT FEATURES

ISO-DIN
head unit
provisions
Incorporates

Incorporated

factory climate
controls into
installation

APPLICATIONS
CAR

PAGE

FORD
Taurus 2004-2007..................................................1-3
MERCURY
Sable 2004-2007.....................................................1-3

TOOLS REQUIRED

Torx-head screwdriver

86-5618 - Head unit
removal keys

99-5717

INSTALLATION
INSTRUCTIONS

Open the trunk, remove (4) pop-clips from the driver's side trunk liner and remove the liner.

(see Fig. A).

Locate the factory tuner on the wall of the trunk and disconnect the speaker and

antenna plugs (it is NOT necessary to remove the tuner). (see Fig. B). Plug the 70-5715 into

the unit speaker plug and the antenna extension lead into the unit antenna plug. Slide the

extension harness through the space in the back seat between the seat back and seat bottom.

Unclip the rocker trim, tuck the extension harness under the carpet and stretch the harness to

the back of the dash. (Replace the rocker trim when completed). Splice the speaker leads on

the extension harness into the rear of the aftermarket head unit. Plug the factory wiring

harnesses into the switch connectors (previously mounted in step #2) and audio connectors

on the back of the Integrated Mounting Kit.

(located under
the rear deck)

Re-connect the battery terminal and test the unit, climate controls and rear defroster for proper

operation. Snap the Integrated Mounting Kit assembly into the sub-dash.

Fig. A

Fig. B

ISO Faceplate

ISO Brackets

(2) #8 x 3/8"
Phillips Pan-head Screws

Integrated
Mounting Kit

1-800-221-0932 www.metraonline.com

rev. 03/08/07 INST99-5717

Extension

Passenger Air Bag
On/Off Light