Hitachi dzmv100e User Manual
51
Setting Date and Time
5. If the display is correct, press the Se-
lect dial.
To correct the minutes, turn the Select dial to
change them and then press the Select dial.
Blinking will move to the Day digit.
(The movement of blinking depends on the date
display format. Blinking will move from the digit
on the left end of the time in sequence.)
change them and then press the Select dial.
Blinking will move to the Day digit.
(The movement of blinking depends on the date
display format. Blinking will move from the digit
on the left end of the time in sequence.)
6. Perform the same procedure to correct
the day, month and year.
After setting the last digit, press the Select dial:
"OK?" will blink.
"OK?" will blink.
Tip:
•
If you make a mistake during the setting, turn
the Select dial to change to "SET" while "OK?" is blinking and then press the
Select dial: You can start over from the beginning.
the Select dial to change to "SET" while "OK?" is blinking and then press the
Select dial: You can start over from the beginning.
7. Press the Select dial to again enter the date/time, and then press
the MENU button.
The menu screen will turn off.
To set the time to match the time signal
Set the minutes slightly ahead of the current minute, and make "OK?" blink. While
checking the time signal on TV or telephone, press the Select dial at the moment the
set time is reached.
checking the time signal on TV or telephone, press the Select dial at the moment the
set time is reached.
Caution:
• You can change the display format of date and time: See “Changing
Display Format of Date and Time” on page 130.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Charging the built-in battery:
This DVD camera/recorder incorporates a battery to back up the date and time.
Connect the AC adapter/charger or charged battery to the DVD camera/recorder
once every two months, and leave the connection status for at least 24 hours with
camera/recorder power turned off: The built-in battery will be charged.
Connect the AC adapter/charger or charged battery to the DVD camera/recorder
once every two months, and leave the connection status for at least 24 hours with
camera/recorder power turned off: The built-in battery will be charged.
E-P37-53
01.1.29, 1:50 PM
Page 51
Adobe PageMaker 6.5J/PPC