Cadillac escalade 2000 User Manual

Each remote keyless entry transmitter is coded to
prevent another transmitter from unlocking your vehicle.
If a transmitter is lost or stolen, a replacement can be
purchased through your dealer. Remember to bring any
remaining transmitters with you when you go to your
dealer. When the dealer matches the replacement
transmitter to your vehicle, any remaining transmitters
must also be matched. Once your dealer has coded the
new transmitter, the lost transmitter will not unlock your
vehicle. Each vehicle can have only four transmitters
matched to it.

Have each transmitter you intend to match ready for the
next steps. To match transmitters to your vehicle:

1. Turn the ignition to RUN, then to OFF. This will

disarm the theft

-

deterrent system.

2. Remove fuse 17 in the main fuse block, which is

located on the left side of your main instrument
panel. When the fuse block is open, the radio fuse is
located on the lower right corner of your instrument
panel. See “Fuses and Circuit Breakers” in the Index.

3. Turn the ignition from OFF to RUN three times

quickly (within five seconds). The vehicle will
respond by locking the doors, unlocking the driver’s
doors and releasing the tailgate or panel doors. Your
transmitter is now ready to match the vehicle.

4. Press and hold the LOCK and UNLOCK buttons on

the first transmitter for 15 seconds. The vehicle will
respond as in Step 3.

5. Repeat Step 4 for the remaining transmitters.

6. When you have finished matching all of your

transmitters, replace fuse 17.

7. Check that all transmitters work by pressing 

their buttons.

If the transmitters don’t work, or if you’d rather not
match the transmitters yourself, see your dealer.